Swimming Pool Care Tips for Summer Season – Preserve the Work of Your Pool Design Contractor

Swimming Pool Care Tips for Summer Season – Preserve the Work of Your Pool Design Contractor

Swimming Pool Care Tips for Summer Season – Preserve the Work of Your Pool Design Contractor

A pool design contractor knows all too well that summer season means lots of time spent in the pool. This is the reason why you need to ensure that your pool can keep up with the demands during the most scorching of days.

Remove Debris Regularly

It is possibly the easiest thing you can do. You can remove the debris before you take a dip in the pool. You can also spend several minutes every day to use the net for removing floating debris from the pool’s surface. Remove any flowers, branches, or leaves which could land on the water.

Check Pool Filter

See to it that the pool filter is clean. If it is not clean, you have to know what you should do. This maintenance is going to depend on the kind of filter you are using. Check cleaning instructions according to the filter you have. If there is one thing for sure, both will need regular cleaning. An unclean filter will never be able to trap the debris effectively. This will end up causing your swimming pool appears murky. Aside from that, the water pressure is going to change as well.

Perform Pool Vacuuming

It is something that must be done every week. I can help eliminate the debris in areas of the pool that are hard to reach. Aside from that, vacuuming the pool also decreases the need for adding a lot of chemicals. This means that when vacuuming, you don’t just clean your pool but you can also save money at the same time. If you feel like it is not a work you can do, you can look for an automatic vacuum which can be programmed to work on a set schedule. Don’t forget to check the vacuum filter to remove any stuck debris.

Look for Leaks

Lastly, your pool masonry contractor will agree that another important tip for maintaining your pool during summer is to look for leaks. This is actually something you have to do before the hot season starts. There is a tricky way for checking for leaks. Fill a bucket with water of ¾ high. Mark the inner part with a line indicating where the water ends. Put the buck in your pool and mark the outside part of the bucket to indicate the level of water. Let it float for several days. When the water outside and inside the bucket decreases in a same amount, it is because of evaporation. If the outside seems to lose much more water, it means a leak is present, and only a professional can fix it. lagrass

Leave a comment

p1f4X